Filter by price
-
EsTemp® Eugenol / NE
95,00 ر.س2/10gTemporary cement for temporary crown and bridge
EsTemp Eugenol / NE is suitable for temporary cementation of temporary crown and bridge. EsTemp Eugenol is zinc oxide eugenol temporary cement and EsTemp NE is zinc oxide noneugenol temporary cement.- Characteristics
-
- Easy to mix & loss-zero syringe type
- Possible to use Auto-mixing tip
- Low film thickness values
- Enough flowability
- Easy removal
- Indications
-
- Temporary cementation of temporary crown, bridge inlay and onlay
- Temporary cementation of provisional and permanent restoration
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
BaGIC®Ⅱ
100,00 ر.سRadiopaque glass ionomer filling material
BaGIC II is self-cured (chemical cured) glass ionomer filling material, which has radiopacity and fluoride release effect. BaGIC II has high strength, and shows sufficient wear resistance and durability. It has excellent chemical bonding force against the tooth, and is excellent in sealability at marginal sealing.- Characteristics
-
- Excellent biocompatibility
- Fluoride release (Anticariogenic effect)
- Excellent radiopacity
- Low acid erosion
- Low solubility
- Thermal expansion similar to natural teeth
- No shrinkage
- Indications
-
- Restoration of primary teeth
- Core build-up
- Class III restoration
- Class V restoration
- Limited Class I restoration
- Geriatric restoration
- ART (Atraumatic Restorative Treatment) technique restoration
- Sandwich technique restoration
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
Temp.it®
100,00 ر.س3/3gLight-cured flowable temporary filling material
Temp.ro is light-cured elastic material for temporary restorations. It has advantages of easy removal as one piece without any damage to preparation boundaries.- Characteristics
-
- Easy to place
- Easy removal in one piece
- Durable and tight marginal seal
- Low polymerization shrinkage
- Non-sticky
- Elastic
- Suitable for deep inlay preparation with parallel walls
- Indications
-
- All types of temporary fillings, temporary protection in inlay and onlay technique
- Sealing for implant-screw access
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
Temp.it® Flow
100,00 ر.س4/1.2mlLight-cured temporary filling material
Temp.ro is light-cured elastic material for temporary restorations. It has advantages of easy removal as one piece without any damage to preparation boundaries. We also have flowable type, Temp.ro Flow, which has same characteristics but easier dispensing type, in syringe.- Characteristics
-
- Easy to place
- Easy removal in one piece
- Durable and tight marginal seal
- Low polymerization shrinkage
- Non-sticky
- Elastic
- Suitable for deep inlay preparation with parallel walls
- Indications
-
- All types of temporary fillings, temporary protection in inlay and onlay technique
- Sealing for implant-screw access
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
FineDam™
100,00 ر.س4/1.2mlResin barrier for isolating tissue
FineDam is light-cured resin barrier for isolating tissue adjacent to teeth being bleached.- Characteristics
-
- Easy handling
- Easy to remove in one piece
- High elasticity
- Indications
-
- Resin barrier for isolating tissue adjacent to teeth being whitened
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
I-SiL Bite
110,00 ر.س2/50mlVPS Bite Registration Material
Designed to make accurate interocclusal recordsCharacteristics
- Exceptional accuracy
- Shore A Hardness of A85
- Thixotropic
- Easy to mix and dispense
- Easy to position in Occlusal and Buccal
Technical Data
*Spident R&D center internal data.I-SiL Bite Registration Data Color Light Blue Working Time (min) 0:30 Setting Time (min) 1:30 Shore A hardness approx. 85 Strain in Compression (%) Non-Applicable Elastic Recovery (%) Non-Applicable Linear Dimensional Change (%) < 0.06 Flavor None تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
K-Bond Universal
140,00 ر.سLight-Cured Universal Bonding Agent
K-Bond Universal is universal bonding agent that combines etching, primer, and adhesive resin in a single bottle. It provides excellent adhesive strength. K-Bond can be used on dentin and enamel for various types of direct restorations.- Characteristics
-
- Compatible with total-etch, selective and self-etch system
- Suitable for direct and indirect bonding procedures
- Homogeneous liquid
- Dual-cure capability without separate activator(pH 3.5)
- Aliphatic amine, instead of aromatic amine, helps product stability and color stability
- Single drop system
- Indications
-
- Bonding of all direct composite restorations
- Bonding of dual/self cure composite and core build-ups
- Repairs of composite fillings
- Root surface desensitization
-
I-SiL Premium Putty
170,00 ر.سFast2/290mlVinyl Polysiloxane Impression (A-Silicone) Regular Set
- Characteristics
-
- Excellent recovery after deformation
- High dimensional stability
- Snap set effect
- Remarkable tear strength
- Superior hydrophilicity - for excellent flow and the precise detail production
- Indications
-
- Crown, Bridge, Implant impression
- Inlay and onlay impression
- Technical Data
-
I-SiL Premium Putty Color Purple Working Time (min) 1:30 Setting Time (min) 4:00 Shore A hardness approx.70 Strain in Compression (%) ≈ 2 Elastic Recovery (%) >99.4 Linear Dimensionak Change (%) < 0.2 Flavor None
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
EsCem®
200,00 ر.س1/8gDual-cured self-adhesive resin cement
EsCem is dual-cured self-adhesive resin cement. It contains MDP, an adhesive monomer, to improve chemical interaction and durability with the hard tissue. EsCem shows strong adhesion to tissues as well as various indirect restorations, such as zirconia, all-ceramic, composite, and metal. It does not require pre-treatment. It is easy to handle and has radiopacity.- Characteristics
-
- Powerful adhesive strength to all indirect restoration without pre-treatment
- Reduced chair time by no need of etching, priming or bonding
- Easy-to-use automix type
- Available shades: A2(Universal), TW
- Easy to remove excess material with 1 second of tack curing/ Radiopacity
- Indications
-
- Final cementing of all-ceramic, composite, or metal inlays, onlays, crowns, and bridges
- Final cementing of posts and screws
- Final cementation of all-ceramic, composite, or metal restorations on implant abutment
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
Core it® Dual
210,00 ر.س2/10gFlowable dual cured core build-up resin Core.it Dual is dual-cured composite material for fabrication of core build ups and post cementations. It has excellent physical properties and can be easily applied onto the tooth. Characteristics Excellent flow & thixotropy Low polymerization shrinkage Compressive strength parallel to natural dentin Excellent radiopaque Convenient operation without slumping Cuts like dentin Available shade : Yellow (tooth), White, Blue Indications All types of core build-up Cementation of root postsتحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
QuickmatFLEX
216,00 ر.سin cooperation with StyleItaliano
QuickmatFLEX are ultra-thin (0.03 mm) titanium sectional matrices with excellent elastic memory. Easy to handle, they offer the right balance of flexibility and stiffness to optimise positioning and adaptation in narrow interproximal spaces. The matrices, thanks to their reduced thickness and improved metal alloy, resist deformation as they feature high elastic resilience that enables them to spring back to their original shape.
Class II treatments with QuickmatFLEX sectional matrices and our sectional matrix rings provide predictable restorations with correct anatomy, narrow contact points and smooth composite surfaces that require minimal finishing steps.
QuickmatFLEX sectional matrices have been rated excellent by 77% of clinicians (CR Clinicians Report)
ultra-thin titanium sectional matrices
sectional matrix
-
Hexa-Temp EsTemp C&B
230,00 ر.س1/50mlSelf-cured temporary crown and bridge material
Hexa-Temp is bisacrylic self-cured resin, ideal for temporary crown and bridge with ease. It is practical thanks to the compatibility of its cartridge with the 1:1 dispenser and mixing tips of VPS impression materials. Hexa-Temp doesn’t need trimming or relining. Hexa-Temp is ideal for long-term temporaries and longer bridge spans as it has exceptional compressive strength and flexural strength with good durability. It is suitable for long term with high fracture resistance. Hexa-Temp shows high gloss, even without polishing, and fluorescence similar to natural teeth.- Characteristics
-
- High compressive and flexural strength
- Highly aesthetic provisional materials
- Convenient work steps, easy to trim and polish
- High stability of shape and shade
- Lower shrinkage and polymerization temperature
- Applicable with mixing tip of impression materials
- Available in 4 shades: A1, A2, A3, TW
- Indications
-
- Fabrication of temporary crown, bridges, inlays,onlays, partial crowns and veneers
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist
QuickmatFLEX are ultra-thin (0.03 mm) titanium sectional matrices with excellent elastic memory. Easy to handle, they offer the right balance of flexibility and stiffness to optimise positioning and adaptation in narrow interproximal spaces. The matrices, thanks to their reduced thickness and improved metal alloy, resist deformation as they feature high elastic resilience that enables them to spring back to their original shape.
Class II treatments with QuickmatFLEX sectional matrices and our sectional matrix rings provide predictable restorations with correct anatomy, narrow contact points and smooth composite surfaces that require minimal finishing steps.
