Filter by price
-
Out of stock
The Unica Master Kit offers a selection of the essentials for complete control over anterior restorations. The system includes Unica and Unica minideep anterior matrices, Unica Proximal and Unica Proximal deep, as well as a variety of myWedges to be used as required. The product selection covers a wide range of indications: from direct layering of composite veneers (partial and total) & shape modification (i.e. diastema closure & peg-shaped lateral incisors) to class III to V anterior restorations. Unica and Unica Minideep matrices can be very useful in demanding cases that require restoration of the cervical and proximal areas (full veneer). Unica Proximal is the ideal matrix for restoring only the interproximal margins, without involving the cervical region, when unobstructed access and clear visibility are essential for a successful procedure, even when working mesially and distally at the same time. The products are supplied in a new luxury Polydentia branded box with reusable trays that can accommodate the units so that they are always on hand. The box and trays are sized to fit in cabinet drawers for secure storage and are made of recyclable and cleanable materials. Unica master kit is also available in refills. Available for sale from the second half of June 2025.become a master of anterior restorations
anterior matrix system
-
myWedge is an interproximal wedge made of hi-tech plastic material. Its innovative hollow v-shape allows it to compress and adapt to the interproximal anatomy of teeth. It prevents damage to the papilla while guiding and forming the matrix band to the anatomy of the cervical area of the tooth. myWedge’s unique roundhead geometry has been designed for easy handling, placement, and removal of the wedge with any standard tweezers or forceps. -
Out of stock
Light-cured flowable composite resin
EsFlow PLUS Injectable is light-cured flowable composite resin for direct restoratives. Using uniform nano fillers, it has enhanced physical strength and can be used even on occlusal surface. EsFlow PLUS Injectable is high viscosity flowable with low extrusion force. EsFlow Plus Injectable is thixotropic and has no stringing- Characteristics
-
- Exceptional physical strength
- Strong enough to replace a conventional composite
- Thixotropic
- Excellent gloss retention
- No stringing
- Easy extrusion
- Available shades: A1, A2, A3, A3.5, B1, B2, CV, AO, AE
- Indications
-
- Class I-V restoration
- Base liner
- Undercut filling
- Repair of composite or ceramic restoration
- Shade
-
-
Out of stock
Light-cured flowable composite resin
EsFlow PLUS Core it LC is light-cured flowable composite resin for direct restoratives. Using uniform nano fillers, it has enhanced physical strength and enough depth of cure to be used as core build up material. EsFlow PLUS Core.it LC is high viscosity flowable with low extrusion force. EsFlow PLUS Core.it LC is thixotropic and has no stringing.- Characteristics
-
- Exceptional physical strength
- Strong enough to replace a conventional composite
- Thixotropic
- No stringing
- Easy extrusion
- Available shades: A2
- Indications
-
- Core Build Up
-
Out of stock
Light-cured flowable composite resin
EsFlow PLUS Bulk Fill is light-cured flowable composite resin for direct restoratives. Using uniform nano fillers, it has enhanced physical strength and enough depth of cure to be polymerized as bulk filled. EsFlow PLUS Bulk Fill has great flowability and has no stringing.Characteristics-
- Exceptional physical strength
- Strong enough to replace a conventional composite
- No stringing
- Easy extrusion
-
- Class I-V restoration
- Base liner
- Undercut filling
- Shade
-
-
Out of stock
Bleaching reservoirs on plaster model
Block-out Resin is light-cured methacrylate-based utility resin. It is designed for laboratory use such as for bleaching reservoirs on plaster model.- Characteristics
-
- Low viscosity
- Blue color
- Provides reservoir space for bleaching tray
- Indications
-
- For bleaching reservoirs on plaster model
- Use for other laboratory procedures
-
Out of stock
- Characteristics
-
- Ultra-light(130g)
- Cordless
- Sleek
- OLED screen
- Handpiece LED curing light that features a digital display and 1-touch functionality
- Consistent output of 1,800mW/cm2 (high-mode) 4modes to choose from including soft-start mode to reduce polymerization shrinkage
- Made in korea
- 1-year warranty
-
NOP Needle
18,50 ر.س27G30GLSXS12mm × 0.26 mm12mm × 0.3 mm21mm × 0.3 mm21mm× 0.4 mm25mm × 0.3 mm30mm × 0.4 mm35mm × 0.4 mm38mm × 0.4 mm- Characteristics
-
- Ultra-sharp, tri-bevel lancet offers smooth entry into tissue, enhancing patient comfort
- Silicone coating significantly reduces pain and tissue damage
- Triangle bevel indicator for needle tip orientation
- EO Sterilized
- 3D cutting
-
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
Paper Point
22,00 ر.سAbsorbent Paperpoints
- Characteristics
-
- Used in root canal therapy
- Removes moisture from root canal, introduces medicaments
- Hand rolled to ensure better absorbency
- ISO/ADA sized
- Gamma irradiation sterilized
-
Guttapercha Point
25,00 ر.س4.6.152025303540Guttapercha Points
- Characteristics
-
- Hand-rolled to the highest standards
- Cadmium-free, radiopaque
- Gamma irradiation sterilized
- Inspected four times to guarantee flawless consistency in size, taper and uniformity
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
FineEtch®
38,00 ر.س3/5mlEtching gel
FineEtch 37% is a phosphoric acid(H3PO4) semi-gel-type agent intended for use on dentin and enamel. FineEtch will effectively remove the smear layer and help successful bonding.- Characteristics
-
- 37% phosphoric acid and semi-gel consistency for ideal applications
- Effective removal of smear layers, enhancing the bonding between tooth and restorative material
- Bio-compatible polymeric materials contained
- Complete residue-free after water-spray
- Excellent viscosity
- Indications
-
- MDR TF Indication
- Pretreatment etchant before resin (help to having a strong bonding strength between resin and teeth)
- Pretreatment etchant before sealant (help to having a strong bonding strength between sealant and teeth)
- Remove smear layer of dentin and enamel
- Effectiveness
-
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
EsCom®100
48,00 ر.س1/4gLight-cured restorative hybrid composite resin
EsCom100 is light-cured restorative hybrid composite resin for posterior and anterior restorations. EsCom100 has high compressive strength and excellent durability.- Characteristics
-
- High compressive strength
- Low polymerization shrinkage
- Easy to handle
- Excellent matching with natural tooth
- Available shades (11shades): A1, A2, A3, A3.5, A4, B1, B2, C2, AO2, AO3, TW
- Indications
-
- Class I~V restorations
- Direct anterior and posterior restorations
- Direct veneers
- Blocking out of undercuts
- Repair of composite and ceramic veneers
- Core build up
- Splinting mobile teeth
- Shade
-
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
SoftPrep®
50,00 ر.س4/1.5gRoot canal preparation EDTA cream
SoftPrep is 15.7% EDTA for lubricant and chelating in root canal. It makes smooth binding and prevents the files from being broken. Water soluble base leaves no residue and easily removes calcifications.- Characteristics
-
- 15.7% EDTA in a water soluble base makes no residue and easily removes calcifications
- Indications
-
- Lubricating to minimize the binding and breaking of files
- Chelating and removing calcification
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
EsBond®
52,00 ر.س5mlLight-cured 5th bonding agent
EsBond is 5th generation bonding agent that provides high bonding strength in a convenient single bottle application. It is designed to bond all classes of direct composite restorations to dentin, enamel, as well as composite, porcelain and amalgam.- Characteristics
-
- 5th Generation bonding agent
- Direct light-cured adhesive system
- High bonding strength
- Wet bonding system
- Indications
-
- All direct composite restorations
- Composite indirect restorative cementation
- Composite repairs
- Composite core build-ups(for use with EsBond Activator)
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
ViOpex®
53,00 ر.س1/2.2gPremixed Calcium Hydroxide paste with Iodoform VioPex is temporary root canal filling material with excellent radiopacity. It is antibacterial, premixed paste composed of Calcium Hydroxide with Iodoform. Characteristics Easy to clean and remove Good water solubility Excellent antibacterial effect Superior radiopacity High flowability Excellent biocompatibility Easy to handle (for syringe paste type) Indications Apexification Formation of hard tissue barrier Checking the irregular shape of root canal Root canal filling for exudation control Pulp cappingتحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
ViOpaste®
53,00 ر.س1/2gPremixed Calcium Hydroxide paste with Barium Sulfate
VioPaste is water-soluble temporary root canal filling material composed of Calcium Hydroxide with Barium Sulfate. This antibacterial premixed paste offers excellent radiopacity. It is easy to clean and remove.- Characteristics
-
- Easy to clean and remove with good water solubility
- Excellent antibacterial effect
- Superior radiopacity
- Strong bactericidal effect with high pH
- High flowability
- Excellent biocompatibility
- Easy to handle (for syringe paste type)
- Indications
-
- Apexification
- Formation of hard tissue barrier
- Check the irregular shape of root canal
- Root canal filling for exudation control
- Pulp capping
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
EsFlow®
55,00 ر.س2/2gLight-cured flowable composite resin
EsFlow®LV
Light-cured flowable composite resin
EsFlow is light-cured hybrid flowable composite resin. It uses various sizes of fillers and high molecular weighted Urethane Methacrylate monomer. Therefore EsFlow has superior compressive strength and lower polymerization shrinkage. It is appropriate for Class III – V and deep Class I. SPIDENT CO., LTD. also provides Low Viscosity type for EsFlow. It is more flowable than standard EsFlow and easier to apply for hard-to-reach spots.- Characteristics
-
- Highly esthetic
- Suitable compressive strength
- Low polymerization shrinkage
- Easy handling
- Radiopaque
- Strength equivalent to natural enamel after light-cured
- Available shades(12Shades): A1, A2, A3, A3.5, AO2, AO3, B1, B2, Blue, LVA1, LVA2, LVA3
- Indications
-
- Direct anterior and posterior restorations
- Restoration of fractured (broken) teeth due to trauma
- Restoration of deciduous teeth
- Direct restorative for diastema closure
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
Out of stock
EsFlow® PLUS
55,00 ر.سLight-cured flowable composite resin
EsFlow PLUS Injectable is light-cured flowable composite resin for direct restoratives. Using uniform nano fillers, it has enhanced physical strength and can be used even on occlusal surface. EsFlow PLUS Injectable is high viscosity flowable with low extrusion force. EsFlow Plus Injectable is thixotropic and has no stringing- Characteristics
-
- Exceptional physical strength
- Strong enough to replace a conventional composite
- Thixotropic
- Excellent gloss retention
- No stringing
- Easy extrusion
- Available shades: A1, A2, A3, A3.5, B1, B2, CV, AO, AE
- Indications
-
- Class I-V restoration
- Base liner
- Undercut filling
- Repair of composite or ceramic restoration
- Shade
-
Base-it®
55,00 ر.س2/2gLight-cured base liner
Base.it contains Calcium Hydroxyapatite in Urethane methacrylate oligomer. It makes Base. it reduce pulp irritation and have low polymerization shrinkage.- Characteristics
-
- Pulp irritation reduction
- Low polymerization shrinkage
- Radiopaque
- Secondary dentin formation
- Indications
-
- Base & cavity liner (For thin residual dentin)
- Sealing ability
-
- Adhesive Interface
- Adhesive Interface
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
EsCom®250
68,00 ر.س1/4gLight-cured restorative hybrid composite resin
EsCom250 is the polymer-based dental restorative material. It can be light-cured intra orally for anterior and posterior restoration including occlusal surface. Filler size ranges from 16nm to 1.2μm. Various shades of A1, A2, A3, A3.5, A4, B1, B2, C2, D2, G1, AO2, AO3 and TW for esthetic restoration are provided. All shades of EsCom250 are radio-opaque.- Characteristics
-
- Apply zirconia filler- enhanced flexural compressive strength
- Excellent ability to hold shape
- Low polymerization shrinkage
- Radiopaque
- Available in 13 shades: A1, A2, A3, A3.5, A4, B1, B2, C2, D2, AO2, AO3, G1, TW
- Indications
-
- Direct anterior and posterior restorations
- Restoration of fractured (broken) teeth due to trauma
- Restoration of deciduous teeth
- Direct restorative for diastema closure
- Shade
-
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
Seal it™
70,00 ر.س2/1.2mlLight-cured pit & fissure sealant Seal.it is light-cured dental material designed for sealing pit and fissure of teeth. It has excellent char- acteristics of bonding strength, low polymerization shrinkage and abrasion resistance. Characteristics Low polymerization shrinkage Low abrasion resistance Suitable viscosity with nano-hybrid filler Indications Pit & fissure sealantتحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
ViOseal®
75,00 ر.س1/10gResin based sealer / Root canal sealing material
VioSeal is epoxy resin based root canal sealer which is a paste-paste type in dual syringe. It has out- standing chemical and physical properties, including extremely excellent sealing property and biocom- patibility.- Characteristics
-
- Excellent biocompatibility
- Superior radiopacity
- Tight sealing
- Easy to mix paste-paste
- Insoluble in tissue fluids
- Antimicrobial agent
- Indications
-
- Permanent obturation of root canals in combination with obturation points
- Lubricant & sealing of GP point
- Adhesion agent between GP and root canal wall
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
EsTemp® Implant
80,00 ر.س1/8gNon eugenol temporary resin cement for implant retained crown
EsTemp Implant is non-eugenol, dual-cured temporary resin cement for luting implantretained crowns. It has excellent strength and durability, which allow long-term cementation. It has mechanical retention only – not chemical- with ideal elasticity so that it is easy to remove temporary restorations. The dual cure formula makes it quicker to remove excess material after light cure (5-10 secs).- Characteristics
-
- Dual cure (Light cure & Self cure)
- Radiopaque
- Easy to use (syringe type)
- Secure retention & retrievable
- Excellent strength and durability
- Dual-cure formula makes it quicker to remove excess materials after light-cured
- Indications
-
- Temporary resin cement for implant-retained crowns
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist -
I-SiL Premium
85,00 ر.سHeavy BodyLight BodyRegular BodyFast2/50mlVinyl Polysiloxane Impression (A-Silicone) Regular Set
- Characteristics
-
- 1:1 mixing ratio
- Thixotropic
- Snap set effect
- Superior hydrophilicity - for excellent flow and the precise detail production
- High dimensional stability
- Excellent recovery after deformation
- High tear strength to maintain impression integrity upon removal
- Indications
-
- Crown, Bridge, Implant impression
- Inlay and onlay impression
- 1 step and 2 step impression techniques
- Technical Data
-
*Spident R&D center internal data.I-SiL Light Body I-SiL Regular Body I-SiL Heavy Body Color Pink, Yellow Blue Blue Working Time (min) 1:30 1:30 1:30 Setting Time (min) 4:00 4:00 4:00 Shore A hardness approx.58 approx.60 approx.70 Strain in Compression (%) ≈3 ≈ 2 ≈ 3.5 Elastic Recovery (%) >99.6 >99.6 >99.6 Linear Dimensionak Change (%) < 0.16 < 0.13 < 0.2 Flavor None None None
تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج DetailsAdd to WishlistAdd to Wishlist
