-
Out of stock
Light-cured flowable composite resin
EsFlow PLUS Core it LC is light-cured flowable composite resin for direct restoratives. Using uniform nano fillers, it has enhanced physical strength and enough depth of cure to be used as core build up material. EsFlow PLUS Core.it LC is high viscosity flowable with low extrusion force. EsFlow PLUS Core.it LC is thixotropic and has no stringing.- Characteristics
-
- Exceptional physical strength
- Strong enough to replace a conventional composite
- Thixotropic
- No stringing
- Easy extrusion
- Available shades: A2
- Indications
-
- Core Build Up
-
Out of stock
Light-cured flowable composite resin
EsFlow PLUS Bulk Fill is light-cured flowable composite resin for direct restoratives. Using uniform nano fillers, it has enhanced physical strength and enough depth of cure to be polymerized as bulk filled. EsFlow PLUS Bulk Fill has great flowability and has no stringing.Characteristics-
- Exceptional physical strength
- Strong enough to replace a conventional composite
- No stringing
- Easy extrusion
-
- Class I-V restoration
- Base liner
- Undercut filling
- Shade
-
-
Out of stock
Light-cured flowable composite resin
EsFlow PLUS Injectable is light-cured flowable composite resin for direct restoratives. Using uniform nano fillers, it has enhanced physical strength and can be used even on occlusal surface. EsFlow PLUS Injectable is high viscosity flowable with low extrusion force. EsFlow Plus Injectable is thixotropic and has no stringing- Characteristics
-
- Exceptional physical strength
- Strong enough to replace a conventional composite
- Thixotropic
- Excellent gloss retention
- No stringing
- Easy extrusion
- Available shades: A1, A2, A3, A3.5, B1, B2, CV, AO, AE
- Indications
-
- Class I-V restoration
- Base liner
- Undercut filling
- Repair of composite or ceramic restoration
- Shade
-
Light-cured flowable composite resin
EsFlow®LV
Light-cured flowable composite resin
EsFlow is light-cured hybrid flowable composite resin. It uses various sizes of fillers and high molecular weighted Urethane Methacrylate monomer. Therefore EsFlow has superior compressive strength and lower polymerization shrinkage. It is appropriate for Class III – V and deep Class I. SPIDENT CO., LTD. also provides Low Viscosity type for EsFlow. It is more flowable than standard EsFlow and easier to apply for hard-to-reach spots.- Characteristics
-
- Highly esthetic
- Suitable compressive strength
- Low polymerization shrinkage
- Easy handling
- Radiopaque
- Strength equivalent to natural enamel after light-cured
- Available shades(12Shades): A1, A2, A3, A3.5, AO2, AO3, B1, B2, Blue, LVA1, LVA2, LVA3
- Indications
-
- Direct anterior and posterior restorations
- Restoration of fractured (broken) teeth due to trauma
- Restoration of deciduous teeth
- Direct restorative for diastema closure
-
Light-cured restorative hybrid composite resin
EsCom250 is the polymer-based dental restorative material. It can be light-cured intra orally for anterior and posterior restoration including occlusal surface. Filler size ranges from 16nm to 1.2μm. Various shades of A1, A2, A3, A3.5, A4, B1, B2, C2, D2, G1, AO2, AO3 and TW for esthetic restoration are provided. All shades of EsCom250 are radio-opaque.- Characteristics
-
- Apply zirconia filler- enhanced flexural compressive strength
- Excellent ability to hold shape
- Low polymerization shrinkage
- Radiopaque
- Available in 13 shades: A1, A2, A3, A3.5, A4, B1, B2, C2, D2, AO2, AO3, G1, TW
- Indications
-
- Direct anterior and posterior restorations
- Restoration of fractured (broken) teeth due to trauma
- Restoration of deciduous teeth
- Direct restorative for diastema closure
- Shade
-
-
Light-cured restorative hybrid composite resin
EsCom100 is light-cured restorative hybrid composite resin for posterior and anterior restorations. EsCom100 has high compressive strength and excellent durability.- Characteristics
-
- High compressive strength
- Low polymerization shrinkage
- Easy to handle
- Excellent matching with natural tooth
- Available shades (11shades): A1, A2, A3, A3.5, A4, B1, B2, C2, AO2, AO3, TW
- Indications
-
- Class I~V restorations
- Direct anterior and posterior restorations
- Direct veneers
- Blocking out of undercuts
- Repair of composite and ceramic veneers
- Core build up
- Splinting mobile teeth
- Shade
-
-
Resin-modified Glass Ionomer Luting Cement
EsCem RMGI is resin-modified glass ionomer cement. Its light-curing option makes it easy to remove excess cement, allowing shorter chair time. EsCem RMGI is delivered in dual syringe, consisting of the base and catalyst. It is used to cement indirect restorations.- Characteristics
-
- Dual dispensing type (Auto-mix and hand-mix)
- Excellent physical strength with Zirconium Silicate (ZrSiO4)
- Easy clean up with tack curing 5 seconds
- Exceptional bond strength to tooth structure and indirect restorations
- Reliable bond strength over time
- Ideal film thickness
- Cream-like texture and easy handling
- Outstanding esthetic shades and high translucency of light (49%)
- Continuous fluoride release
- Indications
-
- Cementation of the following indirect restorations
- Metal-based inlays, onlays, crowns and bridges
- Resin inlays, onlays, crowns and bridges
- All ceramic inlays
- All high-strength (zirconia-based) all-ceramic crowns and bridges
- Metal, ceramic, and fiber posts
-
Dual-cured self-adhesive resin cement
EsCem is dual-cured self-adhesive resin cement. It contains MDP, an adhesive monomer, to improve chemical interaction and durability with the hard tissue. EsCem shows strong adhesion to tissues as well as various indirect restorations, such as zirconia, all-ceramic, composite, and metal. It does not require pre-treatment. It is easy to handle and has radiopacity.- Characteristics
-
- Powerful adhesive strength to all indirect restoration without pre-treatment
- Reduced chair time by no need of etching, priming or bonding
- Easy-to-use automix type
- Available shades: A2(Universal), TW
- Easy to remove excess material with 1 second of tack curing/ Radiopacity
- Indications
-
- Final cementing of all-ceramic, composite, or metal inlays, onlays, crowns, and bridges
- Final cementing of posts and screws
- Final cementation of all-ceramic, composite, or metal restorations on implant abutment
-
Light-cured 5th bonding agent
EsBond is 5th generation bonding agent that provides high bonding strength in a convenient single bottle application. It is designed to bond all classes of direct composite restorations to dentin, enamel, as well as composite, porcelain and amalgam.- Characteristics
-
- 5th Generation bonding agent
- Direct light-cured adhesive system
- High bonding strength
- Wet bonding system
- Indications
-
- All direct composite restorations
- Composite indirect restorative cementation
- Composite repairs
- Composite core build-ups(for use with EsBond Activator)
-
Flowable dual cured core build-up resin Core.it Dual is dual-cured composite material for fabrication of core build ups and post cementations. It has excellent physical properties and can be easily applied onto the tooth. Characteristics Excellent flow & thixotropy Low polymerization shrinkage Compressive strength parallel to natural dentin Excellent radiopaque Convenient operation without slumping Cuts like dentin Available shade : Yellow (tooth), White, Blue Indications All types of core build-up Cementation of root posts -
Out of stock
Bleaching reservoirs on plaster model
Block-out Resin is light-cured methacrylate-based utility resin. It is designed for laboratory use such as for bleaching reservoirs on plaster model.- Characteristics
-
- Low viscosity
- Blue color
- Provides reservoir space for bleaching tray
- Indications
-
- For bleaching reservoirs on plaster model
- Use for other laboratory procedures
-
Light-cured base liner
Base.it contains Calcium Hydroxyapatite in Urethane methacrylate oligomer. It makes Base. it reduce pulp irritation and have low polymerization shrinkage.- Characteristics
-
- Pulp irritation reduction
- Low polymerization shrinkage
- Radiopaque
- Secondary dentin formation
- Indications
-
- Base & cavity liner (For thin residual dentin)
- Sealing ability
-
- Adhesive Interface
- Adhesive Interface
shopHtan Bassam2025-09-17T19:29:44+00:00
