-
Resin based sealer / Root canal sealing material
VioSeal is epoxy resin based root canal sealer which is a paste-paste type in dual syringe. It has out- standing chemical and physical properties, including extremely excellent sealing property and biocom- patibility.- Characteristics
-
- Excellent biocompatibility
- Superior radiopacity
- Tight sealing
- Easy to mix paste-paste
- Insoluble in tissue fluids
- Antimicrobial agent
- Indications
-
- Permanent obturation of root canals in combination with obturation points
- Lubricant & sealing of GP point
- Adhesion agent between GP and root canal wall
-
Premixed Calcium Hydroxide paste with Iodoform VioPex is temporary root canal filling material with excellent radiopacity. It is antibacterial, premixed paste composed of Calcium Hydroxide with Iodoform. Characteristics Easy to clean and remove Good water solubility Excellent antibacterial effect Superior radiopacity High flowability Excellent biocompatibility Easy to handle (for syringe paste type) Indications Apexification Formation of hard tissue barrier Checking the irregular shape of root canal Root canal filling for exudation control Pulp capping -
Premixed Calcium Hydroxide paste with Barium Sulfate
VioPaste is water-soluble temporary root canal filling material composed of Calcium Hydroxide with Barium Sulfate. This antibacterial premixed paste offers excellent radiopacity. It is easy to clean and remove.- Characteristics
-
- Easy to clean and remove with good water solubility
- Excellent antibacterial effect
- Superior radiopacity
- Strong bactericidal effect with high pH
- High flowability
- Excellent biocompatibility
- Easy to handle (for syringe paste type)
- Indications
-
- Apexification
- Formation of hard tissue barrier
- Check the irregular shape of root canal
- Root canal filling for exudation control
- Pulp capping
-
Vacu-Mixer is world's first portable impression auto-mixer. With a touch of the button, it brings you flawless auto mixing without voids.-
- 1:1 ratio eliminates mixing errors
- 10 seconds for full tray loading
- No voids
- Portable and compact
- Flawless auto mixing reduces chairtime and
- minimizes retakes
-
-
Light-cured temporary filling material
Temp.ro is light-cured elastic material for temporary restorations. It has advantages of easy removal as one piece without any damage to preparation boundaries. We also have flowable type, Temp.ro Flow, which has same characteristics but easier dispensing type, in syringe.- Characteristics
-
- Easy to place
- Easy removal in one piece
- Durable and tight marginal seal
- Low polymerization shrinkage
- Non-sticky
- Elastic
- Suitable for deep inlay preparation with parallel walls
- Indications
-
- All types of temporary fillings, temporary protection in inlay and onlay technique
- Sealing for implant-screw access
-
Light-cured flowable temporary filling material
Temp.ro is light-cured elastic material for temporary restorations. It has advantages of easy removal as one piece without any damage to preparation boundaries.- Characteristics
-
- Easy to place
- Easy removal in one piece
- Durable and tight marginal seal
- Low polymerization shrinkage
- Non-sticky
- Elastic
- Suitable for deep inlay preparation with parallel walls
- Indications
-
- All types of temporary fillings, temporary protection in inlay and onlay technique
- Sealing for implant-screw access
-
Out of stock
SPISCAN PRO is Phosphor Plate Scanner which delivers great digital X-ray image with 35μm pixel size. By providing different imaging plate sizes (0,1,2,3,4c), it leads users to use on various cases. We provide our own software and yet through TWAIN driver, it can also be linked with other dental diagnostic software. -
-
Root canal preparation EDTA cream
SoftPrep is 15.7% EDTA for lubricant and chelating in root canal. It makes smooth binding and prevents the files from being broken. Water soluble base leaves no residue and easily removes calcifications.- Characteristics
-
- 15.7% EDTA in a water soluble base makes no residue and easily removes calcifications
- Indications
-
- Lubricating to minimize the binding and breaking of files
- Chelating and removing calcification
-
Light-cured pit & fissure sealant Seal.it is light-cured dental material designed for sealing pit and fissure of teeth. It has excellent char- acteristics of bonding strength, low polymerization shrinkage and abrasion resistance. Characteristics Low polymerization shrinkage Low abrasion resistance Suitable viscosity with nano-hybrid filler Indications Pit & fissure sealant -
Absorbent Paperpoints
- Characteristics
-
- Used in root canal therapy
- Removes moisture from root canal, introduces medicaments
- Hand rolled to ensure better absorbency
- ISO/ADA sized
- Gamma irradiation sterilized
-
- Characteristics
-
- Ultra-sharp, tri-bevel lancet offers smooth entry into tissue, enhancing patient comfort
- Silicone coating significantly reduces pain and tissue damage
- Triangle bevel indicator for needle tip orientation
- EO Sterilized
- 3D cutting
-
-
Light-Cured Universal Bonding Agent
K-Bond Universal is universal bonding agent that combines etching, primer, and adhesive resin in a single bottle. It provides excellent adhesive strength. K-Bond can be used on dentin and enamel for various types of direct restorations.- Characteristics
-
- Compatible with total-etch, selective and self-etch system
- Suitable for direct and indirect bonding procedures
- Homogeneous liquid
- Dual-cure capability without separate activator(pH 3.5)
- Aliphatic amine, instead of aromatic amine, helps product stability and color stability
- Single drop system
- Indications
-
- Bonding of all direct composite restorations
- Bonding of dual/self cure composite and core build-ups
- Repairs of composite fillings
- Root surface desensitization
-
Vinyl Polysiloxane Impression (A-Silicone) Regular Set
- Characteristics
-
- Excellent recovery after deformation
- High dimensional stability
- Snap set effect
- Remarkable tear strength
- Superior hydrophilicity - for excellent flow and the precise detail production
- Indications
-
- Crown, Bridge, Implant impression
- Inlay and onlay impression
- Technical Data
-
I-SiL Premium Putty Color Purple Working Time (min) 1:30 Setting Time (min) 4:00 Shore A hardness approx.70 Strain in Compression (%) ≈ 2 Elastic Recovery (%) >99.4 Linear Dimensionak Change (%) < 0.2 Flavor None
-
Regular Set
- Characteristics
-
- Same great impression material as
- I-SiL Premium available for Vacu-Mixer
- Improved hydrophilicity at the surface from
- the start of mixing
- Designed to minimize voids and bubbles
- High tear strength to maintain impression integrity
- upon removal
- Comparison of auto-mixing and manual mixing
-
- Technical Data
-
*Spident R&D center internal data.I-SiL Jumbo Regular I-SiL Jumbo Heavy Color Blue Blue Working Time (min) 1:30 1:30 Setting Time (min) 4:00 4:00 Shore A hardness approx.60 approx.70 Strain in Compression (%) ≈ 2 ≈ 3.5 Elastic Recovery (%) >99.6 >99.6 Linear Dimensionak Change (%) < 0.13 < 0.2 Flavor None None
-
Vinyl Polysiloxane Impression (A-Silicone) Regular Set
- Characteristics
-
- 1:1 mixing ratio
- Thixotropic
- Snap set effect
- Superior hydrophilicity - for excellent flow and the precise detail production
- High dimensional stability
- Excellent recovery after deformation
- High tear strength to maintain impression integrity upon removal
- Indications
-
- Crown, Bridge, Implant impression
- Inlay and onlay impression
- 1 step and 2 step impression techniques
- Technical Data
-
*Spident R&D center internal data.I-SiL Light Body I-SiL Regular Body I-SiL Heavy Body Color Pink, Yellow Blue Blue Working Time (min) 1:30 1:30 1:30 Setting Time (min) 4:00 4:00 4:00 Shore A hardness approx.58 approx.60 approx.70 Strain in Compression (%) ≈3 ≈ 2 ≈ 3.5 Elastic Recovery (%) >99.6 >99.6 >99.6 Linear Dimensionak Change (%) < 0.16 < 0.13 < 0.2 Flavor None None None
-
VPS Bite Registration Material
Designed to make accurate interocclusal recordsCharacteristics
- Exceptional accuracy
- Shore A Hardness of A85
- Thixotropic
- Easy to mix and dispense
- Easy to position in Occlusal and Buccal
Technical Data
*Spident R&D center internal data.I-SiL Bite Registration Data Color Light Blue Working Time (min) 0:30 Setting Time (min) 1:30 Shore A hardness approx. 85 Strain in Compression (%) Non-Applicable Elastic Recovery (%) Non-Applicable Linear Dimensional Change (%) < 0.06 Flavor None -
Self-cured temporary crown and bridge material
Hexa-Temp is bisacrylic self-cured resin, ideal for temporary crown and bridge with ease. It is practical thanks to the compatibility of its cartridge with the 1:1 dispenser and mixing tips of VPS impression materials. Hexa-Temp doesn’t need trimming or relining. Hexa-Temp is ideal for long-term temporaries and longer bridge spans as it has exceptional compressive strength and flexural strength with good durability. It is suitable for long term with high fracture resistance. Hexa-Temp shows high gloss, even without polishing, and fluorescence similar to natural teeth.- Characteristics
-
- High compressive and flexural strength
- Highly aesthetic provisional materials
- Convenient work steps, easy to trim and polish
- High stability of shape and shade
- Lower shrinkage and polymerization temperature
- Applicable with mixing tip of impression materials
- Available in 4 shades: A1, A2, A3, TW
- Indications
-
- Fabrication of temporary crown, bridges, inlays,onlays, partial crowns and veneers
-
Guttapercha Points
- Characteristics
-
- Hand-rolled to the highest standards
- Cadmium-free, radiopaque
- Gamma irradiation sterilized
- Inspected four times to guarantee flawless consistency in size, taper and uniformity
-
Out of stock
- Characteristics
-
- Ultra-light(130g)
- Cordless
- Sleek
- OLED screen
- Handpiece LED curing light that features a digital display and 1-touch functionality
- Consistent output of 1,800mW/cm2 (high-mode) 4modes to choose from including soft-start mode to reduce polymerization shrinkage
- Made in korea
- 1-year warranty
-
Etching gel
FineEtch 37% is a phosphoric acid(H3PO4) semi-gel-type agent intended for use on dentin and enamel. FineEtch will effectively remove the smear layer and help successful bonding.- Characteristics
-
- 37% phosphoric acid and semi-gel consistency for ideal applications
- Effective removal of smear layers, enhancing the bonding between tooth and restorative material
- Bio-compatible polymeric materials contained
- Complete residue-free after water-spray
- Excellent viscosity
- Indications
-
- MDR TF Indication
- Pretreatment etchant before resin (help to having a strong bonding strength between resin and teeth)
- Pretreatment etchant before sealant (help to having a strong bonding strength between sealant and teeth)
- Remove smear layer of dentin and enamel
- Effectiveness
-
-
Resin barrier for isolating tissue
FineDam is light-cured resin barrier for isolating tissue adjacent to teeth being bleached.- Characteristics
-
- Easy handling
- Easy to remove in one piece
- High elasticity
- Indications
-
- Resin barrier for isolating tissue adjacent to teeth being whitened
-
Non eugenol temporary resin cement for implant retained crown
EsTemp Implant is non-eugenol, dual-cured temporary resin cement for luting implantretained crowns. It has excellent strength and durability, which allow long-term cementation. It has mechanical retention only – not chemical- with ideal elasticity so that it is easy to remove temporary restorations. The dual cure formula makes it quicker to remove excess material after light cure (5-10 secs).- Characteristics
-
- Dual cure (Light cure & Self cure)
- Radiopaque
- Easy to use (syringe type)
- Secure retention & retrievable
- Excellent strength and durability
- Dual-cure formula makes it quicker to remove excess materials after light-cured
- Indications
-
- Temporary resin cement for implant-retained crowns
-
Temporary cement for temporary crown and bridge
EsTemp Eugenol / NE is suitable for temporary cementation of temporary crown and bridge. EsTemp Eugenol is zinc oxide eugenol temporary cement and EsTemp NE is zinc oxide noneugenol temporary cement.- Characteristics
-
- Easy to mix & loss-zero syringe type
- Possible to use Auto-mixing tip
- Low film thickness values
- Enough flowability
- Easy removal
- Indications
-
- Temporary cementation of temporary crown, bridge inlay and onlay
- Temporary cementation of provisional and permanent restoration
-
Out of stock
Light-cured flowable composite resin
EsFlow PLUS Injectable is light-cured flowable composite resin for direct restoratives. Using uniform nano fillers, it has enhanced physical strength and can be used even on occlusal surface. EsFlow PLUS Injectable is high viscosity flowable with low extrusion force. EsFlow Plus Injectable is thixotropic and has no stringing- Characteristics
-
- Exceptional physical strength
- Strong enough to replace a conventional composite
- Thixotropic
- Excellent gloss retention
- No stringing
- Easy extrusion
- Available shades: A1, A2, A3, A3.5, B1, B2, CV, AO, AE
- Indications
-
- Class I-V restoration
- Base liner
- Undercut filling
- Repair of composite or ceramic restoration
- Shade
-
shopHtan Bassam2025-09-17T19:29:44+00:00
